Table of Contents
Advertisement
Safety instructions
Please follow these safety instructions closely to prevent accidents and
material losses. For safety instructions in conjunction with boilers, see
separate installation instructions.
Safety regulations
Installation, commissioning,
inspection, maintenance and repairs
must only be carried out by a
competent person (heating engineer/
installation contractor).
Observe all current safety regulations
as defined by DIN, EN, DVGW, TRGI,
TRF and VDE or locally applicable
standards.
See also the "Safety instructions" in
the "Vitotec technical documentation"
folder.
Product information
DHW cylinder with internal indirect coils, made from stainless steel for
heating domestic hot water in conjunction with boilers, district heating or
low temperature heating systems and/or electric immersion heater.
200, 300 and 500 litre capacity
Suitable for systems conforming to DIN 1988, DIN 4751 and DIN 4753.
DIN registration applied for.
2
Before working on the equipment/
heating system, isolate the power
supply (e.g. by removing a separate
mains fuse or by means of a main
isolator) and safeguard against
unauthorised reconnection.
¨ Safety instructions
In this instruction manual, this
heading denotes information which
must be observed to prevent
accidents and material losses.
¨ This symbol denotes important
information which must be
observed to prevent material
losses.
Advertisement
Table of Contents
