Before Plugging In; Attachments; To Use Your Food Processor; Key - Kenwood FPM800 series Instructions Manual

l
The appliance will not work if the compact chopper/grinder is incorrectly fitted.
l
Do not process turmeric root in the compact chopper/grinder as it is too hard
and may damage the blades.

before plugging in

l
Make sure your electricity supply is the same as the one shown
on the underside of your appliance.
Important – UK only
l
The wires in the cord are coloured as follows:
Green and Yellow = Earth, Blue = Neutral, Brown = Live.
l
The appliance must be protected by a 13A approved (BS1362)
fuse.
WARNING: THIS APPLIANCE MUST BE EARTHED.
Note:
l
For non-rewireable plugs the fuse cover MUST be refitted when
replacing the fuse. If the fuse cover is lost then the plug must not
be used until a replacement can be obtained. The correct fuse
cover is identified by colour and a replacement may be obtained
from your Kenwood Authorised Repairer (see Service).
l
If a non-rewireable plug is cut off it must be DESTROYED
IMMEDIATELY. An electric shock hazard may arise if an
unwanted non-rewireable plug is inadvertently inserted into a 13A
socket outlet.
l
This appliance conforms to EC directive 2004/108/EC on
Electromagnetic Compatibility and EC regulation no. 1935/2004
of 27/10/2004 on materials intended for contact with food.
before using for the first time
1 Remove the plastic blade covers from the knife blade. Take
care the blades are very sharp. These covers should be
discarded as they are to protect the blade during manufacture
and transit only.
2 Wash the parts see 'care & cleaning'

key

processor
power unit
2
Trïtan™ bowl with drive shaft
3
detachable drive shaft
4
Trïtan™ lid
5
feed tube
6
pushers
7
safety interlocks
8
cord storage (at back)
9
auto button
bk
speed/pulse control
bl
power on light
thermoresist blender
bm
filler cap
bn
lid
bo
goblet
bp
sealing ring
bq
blade unit
br
filler cap vents

attachments

bs
knife blade
bt
dough tool
ck
dual whisk
cl
folding tool
cm
max capacity disc
cn
4mm slicing/grating disc
co
2mm slicing/grating disc
cp
extra fine grater disc
cq
fine Julienne disc
cr
mini bowl and blade
cs
attachment storage box
ct
compact chopper/grinder (if supplied)

to use your food processor

1 Fit the bowl to the power unit. Place the handle towards the
back on the right hand side and turn clockwise
2 Fit an attachment over the bowl drive shaft.
Note: Detachable drive shaft
using the discs, mini bowl, whisk and folding tool.
l
Always fit the bowl and attachment onto the processor before
adding ingredients.
3
3 Fit the lid - ensuring the top of the drive shaft/tool locates into
the centre of the lid.
l
The processor will not operate if the bowl or lid are
not fitted correctly into the interlock. Check that the
feed tube and bowl handle are situated to the right
hand side.
4 Plug in. The Power On light will come on and flash until the bowl
and lid are fitted correctly. Select one of the following options: -
Auto Button – the light will come on when the Auto Button is
pressed and the optimum speed for the attachment will be
automatically selected.
Speed Control – manually select the required speed (refer to the
recommended speed chart).
Pulse – use the pulse (P) for short bursts. The pulse will operate
for as long as the control is held in position.
5 At the end of processing turn the speed control to the 'O' off
position or if using the Auto press the button and the light will go
out.
l
The Power On light will flash if either the lid or bowl
are not fitted or incorrectly fitted.
l
The Auto Button will not operate if a speed is
selected on the speed control.
l
Always switch off and unplug before removing the lid.
important
l
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
5
1
until it locks.
2
should be fitted when