Table of Contents
Advertisement
4. OPERATIONS
Operation when using Clarion Rear Vision camera system
The rear-view image is displayed when the transmission is placed into reverse, or when the manual
switch is operated.
Troubleshooting
The following symptoms are not malfunctions. Before having the unit serviced, check the following
points once more.
Symptom
No image
Wiring is incomplete or disconnected.
A fuse is burned out.
Poor image is
Lens is dirty.
produced
Sunlight or headlights from a vehicle in
the rear are shining directly in the
camera.
The environment is too dark.
Surrounding lighting level changed
suddenly.
6
CC4001U
Reason
Solution
Check wiring once again and confirm correct
connections.
Check the extension cable's fuse. If the fuse
has burned out, replace it with a new fuse of
the same rated capacity (0.5 A). If the fuse
burns out quickly again, consult your dealer, or
the nearest Clarion service station.
Wipe away dirt with a clean wet cloth. Be
careful when cleaning, since strong rubbing
with a dry cloth may scratch the lens.
The image will return to normal when the light
striking the lens is removed.
The image display may be more difficult to see
at night, or when the vehicle is in dark
locations, but it will return to normal when you
move to a brighter location.
• When moving from a bright to a dark
location (especially moving from bright
sunlight to shade), the display may appear
darker, but it will return to its normal
brightness shortly.
• When moving from a dark location to a
bright location (especially moving from
shade to bright light after leaving the vehicle
parked for a long time in bright sunlight), the
display may appear excessively bright, but it
will return to its normal brightness shortly.
Advertisement
Table of Contents
