Magma EB7R-x8 User Manual page 17

M A G M A
Attach one end of the PCI Express cable to the Magma ExpressCard
module and the other end to the connector on the back of the Magma
chassis.
TDP side to Laptop
iPass side to EB7-x8 Chassis
Tighten the thumbscrews connecting the ExpressCard to the cable on
one end and verify the other end is properly latched into the iPass
connector of the chassis.
In spite of the standardized design of the TDP interface, it is not
impossible to connect the male and female connectors upside-down. In
order to avoid that, please note the proper and improper concavity
orientation of the connectors as shown in the two cases below:
Picture A shows
the correct
orientation:
7