Jenn-Air JGRP430W Installation Instructions Manual page 24

10. Gas orifice studs are stamped with a letter and a number.
Install the Number 189 oven bake burner orifice spud.
11. Place LP gas orifice in plastic parts bag for future use and
keep with package containing literature.
12. Push down on the clip on the electrode bracket.
A. Oven bake burner electrode bracket
B. Electrode bracket clip
13. Replace oven bake burner electrode inside bracket.
B
A
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
14. Reinstall the oven bake burner and oven bake burner screws.
See Step 6 for illustration.
15. Replace oven baffle and oven baffle nuts.
24
B
A
Replace Oven Bake Burner Cover
1. Align notches on the oven bake burner cover with shoulder
screws in the bottom of the oven.
A
A. Cover notches (4)
B. Shoulder screws (4)
2. Lower cover and slide to left or right to slide shoulder screws
into the narrow ends of the notches and lock into place.
A
A. Bake burner cover
To Convert Oven Broil Burner (30" [76.2 cm] and 36"
[91.4 cm] models and the Right Oven Cavity on 48"
[121.9 cm] models)
1. Remove broil burner screw and set aside.
A
B
C
A. Broil burner screw
B. Broil burner
C. Broil burner orifice hole
B
B
A