Advertisement
14: Connect and install the USB and HDMI cable
connections in a location the customer can access to use
these features. The USB connection is used for Map and
System Updates, there is no reason for the customer to
access the Nav module once it is installed. The USB will also
charge a connected device but is not for media use.
The HDMI connection will mirror HDMI compatible
phones, note that most phones require an adapter to
connect to an HDMI input. Contact the Phone provider or
Carrier for an approved adpater.
15: Check all connections and then re-connect the vehicle
battery. Test the system before replacing all dash panels.
The vehicle must be outdoors to obtain a GPS Location
once powered on.
Advertisement
