Table of Contents
Advertisement
Quick Links
GMNAV1 Advent Integrated Navigation
This interface is designed to integrate Navigation into select
The following items are supplied with the GMNAV1
•
CAN Module #33814190
•
EQX Power Harness #37614190
•
MLB Power Harness #37514190
•
CAN to NAV #30314170
•
Switch #31414170
•
Installation Guide
Buick and Chevrolet Systems.
INSTALLATION MANUAL
What's in the Box
NOTE: Not all parts are used in every installation.
•
Aux Audio #31514170
•
GPS Antenna #34914170
•
USB Update Cable #32714170
•
Map SD Card #35014170
•
SWC Source Buttons #33714190
•
Extension LVDS Video Cable # 33914190
Advertisement
Table of Contents
Related Manuals for Advent GMNAV1
Summary of Contents for Advent GMNAV1
- Page 1 GMNAV1 Advent Integrated Navigation This interface is designed to integrate Navigation into select Buick and Chevrolet Systems. INSTALLATION MANUAL What’s in the Box The following items are supplied with the GMNAV1 • CAN Module #33814190 • Aux Audio #31514170 •...
-
Page 2: Prior To Installation
Prior to Installation: Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. Read entire instructions thoroughly before starting. This document covers such items as:- •... -
Page 3: Installation
Installation: Removal of the Radio control center is required for installation. Vehicle Specific instructions are available on-line at www. voxxuniversity.com. After the components are removed, connect the following: The navigation module can be located behind the radio or to either side. In some vehicles it may be located below the radio. -
Page 4: Dip Switch Settings
12. Nav activation switch: Included with this kit are two pieces of SWC replacement switch covers. These covers will fit some of the vehicle applications such as the Malibu. Since changes happen quickly at the OEM we suggest you compare the enclosed switch covers with the vehicle you are installing in. -
Page 5: Setup Menu
Navigation Interface Operation: CUE Equipped Vehicles: To change the OEM radio to Navigation Mode: • Press on an open area on the screen for 3 seconds. • Press the Nav switch if installed. • Press the SWC Nav switch for 3 or more seconds if installed. Exit Navigation by: •... -
Page 6: Specifications
Specifications Name Parameters Video input 0.7Vpp with 75 Ω impedance Synchronized signal strength 3‐5Vpp with 5K impedance negative pulse synchronization. RGB resolution By changing DIP4 user can select HD/VGA or normal HD : 800X480 or VGA :640X480 Normal NTSC‐vertical 240 (or 234) Av1, Av2, cam video 0.7Vpp with 75 Ω... - Page 7 Vehicle Specific Instructions, Tech Tips, and Installation notes can be found at WWW.AUDIOVOXUNIVERSITY.COM...
- Page 8 Voxx Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 WWW.ADVENTPRODUCTS.COM © 2014 Printed in China 128-9396...