Table of Contents
Advertisement
VIVOTEK
PTZ > PTZ settings
This section explains how to control the Network Camera's Pan/Tilt/Zoom operation.
There are two ways to enable the camera control function:
1. Digital: Control the e-PTZ operation. Within a field of view, it allows users to quickly move the
focus to a target area for close-up viewing without physically moving the camera.
2. Mechanical: Connect the Network Camera to a PTZ driver or scanner via the RS485
interface.
Digital PTZ Operation (E-PTZ Operation)
The e-PTZ control settings section will be displayed as shown below:
x1.8
x1.8
Select Stream: Select a video stream to set up the e-PTZ control. Please note that each stream can
possess its own preset and patrol settings. For detailed information about how to set up preset and patrol
settings, please refer to page 100.
Auto pan/patrol speed: Select the speed from -5 to 5 (slow/fast) to set up the Auto pan/patrol speed
control.
Zoom factor display
If you check this item, the zoom indicator will be displayed on the home page when you zoom in/out the
live viewing window as the picture shown on the next page.
98 - User's Manual
Advertisement
Table of Contents
