Vivotek IP816A-HP User Manual page 53

3D Noise Reduction is mostly applied in low-light conditions. When enabled in a low-light
condition with fast moving objects, trails of after-images may occur. You may then select a lower
strength level or disable the function.
Electronic image stabilizer
Select the checkbox to enable the Electronic image stabilization (EIS) function.
Note that the Preview button has been cancelled, all changes made to image settings is directly
shown on screen. You can click Restore to recall the original settings without incorporating the
changes. When completed with the settings on this page, click Save to enable the setting. You can
also click on Profile to adjust all settings above in a pop-up window for special lighting conditions.
Activated period: Select the mode this profile to apply to: Day mode, Night mode, or Schedule
mode. Please manually enter a range of time if you choose Schedule mode. Then check Save to
take effect.
Exposure
On this page, you can set the Measurement window, Exposure level, Exposure mode, and
Iris mode. Detailed configurations will be automatically adjusted since the sensor library will
automatically adjust the value according to the ambient light.
Note that when the WDR Pro function is enabled, the Measurement window is not configurable.
Sensor Setting 1:
For normal situations
Sensor Setting 2:
For special situations
VIVOTEK
User's Manual - 53