Advertisement
CARE AND CLEANING
1.
Before cleaning any part of the can opener, unplug the cord.
2.
To remove the blade for easy cleaning, lift the blade bracket up and pull blade
assembly out. The assembly can be washed by hand in sudsy water, rinsed or
wiped with a sponge and dried thoroughly. It is NOT dishwasher-safe. Reverse the
procedure to replace the blade assembly.
3.
Before replacing the blade assembly, wipe the can opener housing, and area
around the drive wheel with a slightly damp cloth or sponge. To remove stubborn
spots, wipe surfaces with nylon or mesh pad and sudsy water. Follow with a clean,
damp cloth. Do not use abrasive cleaners on any part of the can opener as they can
damage the finish.
4.
Do not immerse main body of the can opener into water as this could result in
electric shock.
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday – Friday 8am-5pm
Website: www.goldair.co.nz
Phone: 0800 232 633
Advertisement
