Generator Metering Menu - Kohler 8RESV Operation

3.11 Generator Metering Menu

The generator metering menu displays the generator
voltage and frequency. See Figure 3-12.
Generator ---->
Metering
Three-phase
Volts L1--L2:
Volts L2--L3:
Volts L3--L1:
Frequency:
Figure 3-12 Generator Metering Menu
38 Section 3 RDC2 Controller Operation
Single-phase
Volts:
240 V
Frequency:
240 V 60.0 Hz
240 V
60.0 Hz
Reset
Calibration
<---- Return
Voltage Calibration
Hazardous voltage.
Will cause severe injury or death.
This equipment must be installed and
serviced
personnel.
The voltage calibration mode can be entered from the
Generator Metering menu. Contact a Kohler-authorized
distributor/dealer for service.
The Reset Calibration menu allows you to set the
voltage reading back to the original value after
calibration, if necessary. See Figure 3-12.
Note: Actual settings may vary.
240 V
Reset
Calib? No
Reset
Calib? Yes
DANGER
by qualified electrical
TP-6880 10/14
tp6810