REFRIGERATOR
DOOR GASKET REPLACEMENT
1. Insert the gasket bracket edge under the door frame edge.
2. Position the upper gasket bracket spring so both ends are in the door
channel. (See drawing, below.)
3. Push the clip in until you feel it snap firmly into place.
4. Replace the remaining clips the same way.
Make certain no part of the bracket protrudes at the frame edge.
DOOR GASKET BRACKET AND CLIP PLACEMENT
5. Insert the gasket into the channel and slide it all the way down the bracket.
(This is easier when you start it from the top and work toward the bottom.)
LFX21960ST/LFX25960xx
Page 22 of 75
DISASSEMBLY
TRAINING MANUAL