REFRIGERATOR
INSTALLATION
BASE GRILLE (Kick Plate)
Install the base grille (kick plate). Open
the freezer door, put the grille into
place, and attach it with the screws
provided. Some models may have a
grille that is pressed into place and
held by two plastic pegs.
DOOR HANDLES
The door handles are attached by a
bracket at each end of the handle.
The bracket has a keyhole slot on
the back to fit over the bolts in the
door and slide into place.
Slide the door handle UP to remove it,
DOWN to replace it.
The freezer door handle works in a
similar manner. Slide it RIGHT to
remove it, LEFT to replace it. If it is
necessary to remove the doors to get
the refrigerator into the house, see the
DOOR REMOVAL section on pages
20-21.
DOOR REMOVAL
Child entrapment and suffocation are
not things of the past. Junked or
abandoned refrigerators are
dangerous. If you must scrap a
refrigerator, recover the refrigerant and
permanently remove the doors. Leave
the shelves in place so children cannot
crawl in to play. Dispose of the
scrapped product by an
environmentally acceptable method.
LFX21960ST/LFX25960xx
Page 14 of 75
TRAINING MANUAL