Alpine X009E Owner's Manual page 197

To let the route fit your needs, you can also set which road types are to be
considered for or to be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total
prohibition. If your destination can only be accessed using some of the
excluded road types, they will be used but only as much as necessary. In
this case a warning icon will be shown on the Route screen, and the part of
the route not matching your preference will be displayed in a different colour
on the map.
In the list of road types you can see in how many segments and what total
length of the road type is used in the current route.
Button
Vehicle profiles:
When you first tap
profiles. You have the following options:
Button
You might need to avoid motorways when you are
driving a slow car or you are towing another vehicle.
Charge roads are pay roads where you can purchase
a pass or vignette to use the road for a longer period
of time. They can be enabled or disabled separately
from toll roads.
The software includes toll roads (pay roads where
there is a per-use charge) in the routes by default. If
you disable toll roads, your software plans the best
toll-free route.
The software includes ferries in a planned route by
default. However, a map does not necessarily contain
information about the accessibility of temporary
ferries. You might also need to pay a fare on ferries.
The software excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually
you cannot reach the speed limit on them.
97
Description
, you see the list of default vehicle
Description