Kenwood CP706 Instructions Manual page 3

Important – UK only
●
The wires in the cord are coloured
as follows:
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
●
The appliance must be protected by
a 3A approved (BS1362) fuse.
●
WARNING: THIS APPLIANCE
MUST BE EARTHED.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
●
Wash the parts see 'care and
cleaning'
key
lid
cooking pot
base unit
handles
control knob (CP706)
indicator light (CP706)
Model CP707
display screen
high setting button
low setting button
keep warm setting button
timer increase button
ON/OFF button
timer decrease button
using your manual slow
cooker
(CP706)
1 Follow the recipe and place the
ingredients into the cooking pot.
2 Place the cooking pot into the base
unit. Important - to avoid
being burnt when removing
the cooking pot, ensure it is
placed into the base unit as
shown in the illustrations
with the handles on the
cooking pot in line with the
handles on the base unit.
3 Place the lid in position and plug
the slow cooker into the power
supply.
4 Select the desired setting ie high,
low or keep warm. The indicator
light will come on and cooking will
begin.
5 Allow to cook for the desired time.
6 After cooking, switch off and unplug
the slow cooker.
using your electronic
slow cooker
1 Follow the recipe and place the
ingredients into the cooking pot.
2 Place the cooking pot into the base
unit. Important - to avoid
being burnt when removing
the cooking pot, ensure it is
placed into the base unit as
shown in the illustrations
with the handles on the
cooking pot in line with the
handles on the base unit.
3 Place the lid in position.
4 Plug the slow cooker into the power
supply.
5 Press the ON/OFF button to turn
the slow cooker on. The display will
read 0:00 and the screen will
illuminate. The screen illumination
will turn off if no buttons are
pressed within 30 seconds.
3
,
(CP707)
,