Dual DV714BH Installation & Owner's Manual page 28

DV714BH
Auxiliary Inputs - AV1 & AV2
Using AV1 Input
Using AV2 Input
Rear Camera Operation - (Optional)
Rear View Camera Operation
27
OPERATION
Connect an optional audio/video source into the 3.5mm (front panel) input.
Select AV1 from the Main Menu to listen to audio.
Engage parking brake as described on page 26 to watch video.
Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).
Connect an optional audio/video source to the Auxiliary Input 2 (Red/White/Yellow
RCA connectors). Refer to page 6 for details.
Select AV2 from the Main Menu to listen to audio.
Engage parking brake as described on page 22 to watch video.
Note: The external video output is not active when using the AV1/AV2 inputs or
when viewing video from an iPod device.
The unit will automatically select camera mode when the reverse gear is
selected.
To enable camera mode at any other time, press and hold MODE on the faceplate
for more than two seconds.
Press and hold MODE for more than two seconds to go back to the previous
mode.
Note: Before using, make sure that the camera power wire is connected to the
power antenna (blue) of the receiver.