Installation Before You Start • Dual always recommends professional installation. • Disconnect negative battery terminal. • Remove trim ring from unit (if installed). • Remove 2 transit screws located on top of the unit (if applicable). • Insert the removal keys, and remove the mounting sleeve from the head unit.
Page 3
Installation Mounting the Head Unit: Single DIN Typical DIN mounting Dashboard or Installation Kit Step 1: Insert the mounting sleeve into the installation kit or dashboard. Mounting Sleeve Single DIN Step 2: Dashboard or Installation Kit Bend multiple mounting tabs around the mounting sleeve until the mounting Mounting Sleeve sleeve is secure.
General Operation Power On/Off Press the /MODE button to turn the unit on. Press and hold /MODE button to turn unit off. Faceplate Removal Press RELEASE and pull away from the right side to remove. To re-install, insert left side of faceplate first then push right side to secure.
AM/FM Tuner Operation Seek Tuning TUNE TUNE Press to seek to previous or next strong station. Manual Tuning TUNE TUNE Press and hold the to enter manual TUNE TUNE tuning mode. Then press momentarily to move radio frequency down or up one step at a time. TUNE TUNE Press and hold...
Page 6
CD Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. Playback will begin automatically. Eject CD Press (Eject button) to eject the CD. The unit will change to previous mode of operation. Track Select Press TUNE to skip to the beginning of the next...
USB Operation Playing MP3 Files To play MP3 files, insert a data CD or USB device containing MP3 files. Track Select Press TUNE to skip to the beginning of the next song. Press TUNE to skip to the beginning of the previous song.
Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device name is “DC208BT” The Bluetooth passcode is "1234” Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000".
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the DC208BT and is the answer not in the manual?
Questions and answers