Bluetooth Operation - Dual DV714BH Installation & Owner's Manual

DV714BH

Bluetooth Operation

From the Main Menu screen, press Settings to enter the Settings menu. Press Bluetooth to enter
Bluetooth Menu setup.
Menu Option
Bluetooth Select ON or OFF to enable or disable Bluetooth functionality.
Auto
Setup
Connect
Auto
Answer
Preparation
Pairing a New Device
Connecting a
Paired Device
Disconnecting a
Deleting a
Paired Device
25
OPERATION
Select ON or to program the unit to automatically pair with available
Bluetooth devices. Select OFF to require manual pairing.
Select ON or to program the unit to automatically answer incoming
calls. Select OFF to answer calls manually.
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your
device before you begin the pairing process.
The DV714BH broadcasts the pairing signal constantly when
no devices are currently connected. Complete the pairing
sequence from your Bluetooth device. Refer to the owner's
manual for your device for more details.
The device name is "Dual BT"
Note: The DV714BH can be in any mode of operation when
pairing is performed.
Most Bluetooth devices support the auto-connect feature and
will connect automatically if the device is in range when the
DV714BH is powered-on.
If your device was previously paired but does not connect,
enter the Bluetooth setup menu and select Device List. Use
the desired up and down arrows to scroll through the list of
devices. Press desired device name, then press "Connect" to
connect the device.
To disconnect a device, enter the Bluetooth setup menu and
Device
select Device List. Use the desired up and down arrows to
scroll through the list of devices. Press desired device name,
then press "Disconnect" to connect the device.
To permanently delete a device, enter the Bluetooth setup
menu and select Device List. Use the desired up and down
arrows to scroll through the list of devices. Press desired
device name, then press "Delete" to connect the device.
Action