Canon MB2000 series Online Manual page 433

When Loading the Original on the platen glass:
• Before scanning:
When the preview function is activated, the machine starts pre-scanning before scanning the original.
When pre-scanning is finished, the screen below (preview screen) is displayed on the LCD.
1. Rotate
If you press the right Function button, the original rotates by 180 degrees.
2. Rescan
If you press the left Function button, the original is rescanned.
Press the OK button to start scanning.
• After scanning:
Document setting screen appears on the LCD after scanning each sheet of original.
Remove the first sheet of original from the platen glass and load the second sheet on the platen glass,
then press the OK button.
The machine starts scanning the second sheet of original and copying.
Note
• Remove the first sheet of original from the platen glass and load the second sheet on the platen
glass, then press the OK button.
• You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
• If you use this function in combination with Two-sided copy, the Document setting screen is
displayed after scanning the second sheet of original is complete. Follow the on-screen
instructions to scan the third and fourth sheet of original.
433