Setting Items For Copying - Canon MB2000 series Online Manual

Setting Items for Copying

The following screen is displayed by pressing the right Function button on the Copy standby screen.
Use the button to change the setting item and use the
Note
• Some settings cannot be specified in combination with the setting of other setting item or the copy
menu. If the setting which cannot be specified in combination is selected, Error details is displayed on
the LCD. In this case, press the left Function button to confirm the message, then change the setting.
• The settings of the page size, media type, etc. are retained even if the machine is turned off.
• When copying starts in the copy menu that is not available with the specified setting, The specified
function is not available with current settings. is displayed on the LCD. Change the setting,
following the on-screen instructions.
1. Magnif. (Magnification)
Specify the reduction/enlargement method.
Reducing or Enlarging a Copy
2. Intensity
Specify the intensity. When Auto is selected, the intensity is adjusted automatically according to the
originals loaded on the platen glass. Auto is displayed on the Copy standby screen.
Note
• When Auto is selected, load the original on the platen glass.
3. Page size
Select the page size of the loaded paper.
4. Type (Media type)
button to change the setting.
424