Aligning The Print Head - Canon MB2000 series Online Manual

Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Note
• When the ink has run out during printing the nozzle check pattern, the error message will appear on the
LCD.
A Message Is Displayed
You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*
* Be sure to use paper that is white and clean on both sides.
1. Make sure that the power is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
After inserting the cassette into the machine, the paper information registration screen is displayed on
the LCD. Select A4 or Letter for Page size and Plain paper for Type, then press the OK button.
If a message is displayed on the screen, follow the directions in the message to complete registration.
3. Extend the output tray extension, then open the paper output support.
4. Select Setup on the HOME screen, then press the OK button.
LCD and Operation Panel
The setup menu screen will appear.
5. Select Maintenance, then press the OK button.
The Maintenance screen will appear.
6. Select Auto head alignment, then press the OK button.
210