Canon MB2000 series Online Manual page 338

8. Enter the administrator password.
Use the Numeric buttons to enter a password (0 to 32 alphanumeric characters).
Press the OK button when you finished entering the administrator password.
9. Enter the administrator password you specified again.
Use the Numeric buttons to enter the password you specified.
Press the OK button when you finished entering the administrator password.
The administrator password is enabled.
When You Want to Change or Disable the Administrator Password:
When the administrator password is enabled, selecting Setup, Device settings, and Administrator
password setting in this order and entering the administrator password displays Change administrator
password and Remove administrator password on the LCD. Select either item, then follow the on-
screen instructions to perform settings.
338