How To Install The Blackvue - Pittasoft Blakvue DR500-HD Manual

How to Install the BlackVue

Checking Installation Position
1
It is recommended to install it at the back of rear view mirror. Clean any
foreign matter and moisture from the place where the product will be
installed.
Note
y Do not install the product where it can interfere with the driver's vi-
sion.
How to Insert & Remove the microSD Card
1
Open the cover on the side of the product.
2
Insert the microSD card into the microSD card slot, as shown in the pic-
ture.
3
To remove the microSD card, press the microSD card once and then pull
it out. Make sure that the microSD card doesn't pop out while trying to
remove it.
DR500-HD 13