Changing The Channel; Saving Channels To Memory; Using The Strobe Sos Light/Flashlight - Uniden MHS245 Owner's Manual

Using Your Radio
limited power channel, the radio automatically switches to 1W.
See page 53 for a list of power-restricted channels.

Changing the Channel

Press the Channel Up or Channel Down buttons briefly to scroll
through the channels one channel at a time. Press and hold the
Channel Up or Channel Down buttons to quickly scroll through the
channels.

Saving Channels to Memory

If you find a channel you like and want to listen to it again, save it to
memory. Press and hold SCAN/MEM; the active channel is stored in
memory and MEM displays. Press SCAN/MEM to scan the channels in
memory.
You must have at least 2 channels in memory in order to use
Scan mode. Channel 70 cannot be stored into memory.
NOTE
Press and hold SCAN/MEM again to remove the channel from memory.

Using the Strobe SOS Light/Flashlight

You can use this radio in an emergency. If you turn on the strobe SOS
high-intensity LED light on your radio, your radio will blink "S O S" in
international Morse Code. This will make it easier for rescuers to find you
faster.
Your radio operates normally when the SOS LED strobe is
activated.
NOTE
With the SOS
LED in this state
OFF
SOS
Continuous
UNIDEN MHS245
Do this
Press and hold GPS/
SOS for 2 seconds.
Press and hold GPS/
SOS for 2 seconds.
Press and hold GPS/
SOS for 2 seconds.
30
For this
SOS LED signals SOS
in Morse code.
SOS LED remains on
continuously. (Flashlight
mode)
SOS LED turns off.
Handheld VHF Marine Transceiver