Uniden MHS245 Owner's Manual page 48

Additional Features
The radio can output the following NMEA sentences:
GGA GSV
To connect to a chartplotter:
1. Connect the WHITE wire to the
NMEA positive (+) output.
2. Connect the BLACK wire to the
NMEA ground.
3. Connect the YELLOW wire to the
NMEA positive (+) input.
Use waterproof tape to seal electrical connections.
NOTE
Renaming Channels
If you discover that a marine radio channel has a different common
name in your local area, you can change the name of that channel to
make it easier for you to use (see the channel lists beginning on page 53
for the default channel names). To rename a channel, follow the steps
below:
1. Press MENU/CALL and select Channel Name from the Normal menu.
The screen displays the list of channels.
2. Use Channel Up or Channel Down to choose the channel you want
to change and press DISP/ENT/H/M/L.
3. Select Rename to enter a new name for this channel. The radio
prompts you to enter a new name for this channel. Each name can be
up to 12 characters. Use Channel Up or Channel Down to change
the name.
4. When you fi nish entering the name, the radio displays the new
channel name and asks you to confi rm. To save this new channel
name, select Save; to cancel the change, select Exit. The radio returns
to the channel list.
5. To restore a channel back to its original name, select the channel and
choose Default.
6. When you are satisfi ed with the channel list, select Exit.
UNIDEN MHS245
DSC GSA RMC DSE
48
Handheld VHF Marine Transceiver
WHITE - to NMEA (+) output
BLACK - to NMEA ground
YELLOW - to NMEA (+) input