Grundig GCI-C0735P Owner's Manual page 12

NOTE: ID and password are case sensitive.
It is strongly advised that administrator's password be altered for security concerns. Refer to section 9.2. Security
for further details.
Additionally, users can change the IP Camera's network property, either DHCP or Static IP, directly in the device
finding list. Refer to the following section for changing the IP Camera's network property.
Example of changing IP Camera's network property :
Users can directly change an IP Camera's network property, e.g. from static IP to DHCP, in the finding device list.
The way to change the IP Camera's network property is specified below:
Step 1: In the finding device list, click on the IP Camera of which you would like to change the network property.
On the selected item, right-click and select "Network Setup". Meanwhile, record the IP Camera's MAC address,
for future identification.
Step 2: The "Network Setup" page will come out. Select "DHCP," and press the "Apply" button down the page.
Step 3: Click "OK" on the Note of setting change. Wait for one minute to re-search the IP Camera.
10 English