Table of Contents
Advertisement
Wireless Setting
How to set up automatically
1.Turn on your TV, operate according to the description
in the Settings menu until the Network screen appears.
2.On the Network screen, select Configuration and press
[OK] button to enter the submenu.
3.Set Internet Connection to On and Interface to Wireless
4.Select Wireless Setting and press [OK] button to enter
it.
You can select: Scan\Manual\Auto
5.If you select Scan, a screen will appear listing all of the
wireless networks within range of the TV. Use the [▲/▼]
keys to select the wireless network with your router
SSID and press [OK] to confirm. Proceed to Step 7.
6.If you select Manual, a screen will appear prompting
you to enter the SSID of your wireless network. Press
[OK] and an on-screen keyboard will pop up. Enter the
SSID and select OK. Press [OK] to confirm and a
screen will appear prompting you select the security
mode for your wireless network. Use the [
select the proper security mode and press [OK] to
confirm. If you selected None for the security mode,
proceed to step 9.
7.A screen will appear prompting you to enter the
password for the selected security mode. Press [OK]
and an on-screen keyboard will pop up. Enter the
password and select OK. Press [OK] to confirm.
Proceed to Step 9.
8.If you select Auto, a screen will appear prompting you
to select PIN (personal identification number) or PBC
(push button configuration) setup. Choose the method
supported by your wireless access point.
8a.If you choose PIN, an identification number will appear
on the screen for you to enter into the access point.
After entering the PIN, press the [►] key. If the PIN is
in use by another device, select [REFRESH] to obtain
a new PIN and enter it into the access point. After
entering the PIN, press the [►] key.
8b.If you choose PBC, a screen will appear prompting to
press [►] key. After pressing the [►] key you have two
minutes to locate and press the Push Button on your
access point to connect to the TV.
9.Press the [MENU] key to return to the previous menu.
10.Select Connection Test to check the Internet
connectivity.
DLNA Settings
If your computer can not support DLNA, you need install the
software that supports DLNA such as TVersity and Windows
Media Player11. It is recommended to select Windows Media
Player11 to set and the setup is more simple.
The Network setup on the TV's screen:
Advanced Features
Network setup:
1. Turn on your TV, operate according to the description in the
Settings menu until the Network screen appears.
2. On the Network screen, select Configuration and press [OK]
button to enter the submenu.
3. Set Internet Connection to On and Interface to Ethernet.
4. Select IP Setting and press [OK] to enter it.
5. Set Address Type to Auto.
6. Auto acquires and enters the needed internet values
automatically.
▲/▼
] keys to
7. If the Network function has not acquired the network
connection values, go to the directions for Manual.
8. If set Address Type to Manual, enter IP Setting . Then
press[
the cursor to the entry field. Then press [0~9] buttons to
enter the numbers.
9. Press [
numbers.
10. When done, press [MENU] to return to the previous menu.
11. Select Connection Test to check the internet connectivity.
If the test is not successful, please check whether the
configuration is correct. If the test is successful, operate
as the following instructions.
Set DLNA/DMR to On:
1. On the Network screen, select Applications and press
[OK] to enter the submenu.
2. Press [◄/►] to set DLNA/DMR to On.
31
Settings
Address Type
IP Address
176. 16.
Subnet Mask
255. 255. 255. 255
Default Gateway
172.
Primary DNS
172.
Secondary DNS
0.
Settings
Address Type
IP Address
176. 16.
Subnet Mask
255. 255. 255. 255
Default Gateway
172.
Primary DNS
172.
Secondary DNS
0.
Input
0~9
▲
▼]
/
to select IP Address and press [◄/►] to move
▲
▼]
/
to select the next options to enter the
Settings
DLNA
DMR
Auto
0.
0
16.
0.
0
16.
2.
2
0.
0.
0
Select
Back
MENU
Manual
0.
0
16.
0.
0
16.
2.
2
0.
0.
0
Select
Back
MENU
On
On
Select
Back
MENU
Hide quick links:
Advertisement
Table of Contents
