Connecting The Aerial - Hisense HL55XT710PZLN3D 710 series User Manual

Connecting a PC with VGA Cable
TV JACK
1. Use a VGA cable to connect the PC's VGA output jack to the TV's VGA jack. Use an audio cable to connect the PC's audio
output jacks to TV's PC AUDIO jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
NOTE
Primarily this unit is intended for use as an LCD TV. If you want to use it as a monitor, please contact the
manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility is not warranted.
Connecting an Audio Receiver with Optical Cable
TV JACK
1. Use a optical cable to connect the A/V device's OPTICAL jack to the TV's OPTICAL jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.

Connecting the Aerial

Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the ANT socket on the
TV.
NOTE
Do not connect the TV to the mains supply until you have completed all the connections.
Getting Started
VGA Cable
(not included)
Audio Cable
(not included)
Optical Cable
(not included)
TV JACK
14
EXTERNAL DEVICES
PC
EXTERNAL DEVICES
OR
RF coaxial cable
(not included)