Magellan NAV 6500 User Manual page 73

Press the
Routes
softkey. This screen looks
just like the waypoint
screen but the softkeys are
different. This is the start-
ing point for creating a
route.
WPT002
WPT001
WPT002. Notice the dashed line from WPT001 to the cur-
sor. This helps you visualize the leg you are creating.
Magellan NAV 6500/NAV 6510
WPT002
WPT001
The first step in creating the
route will be to define the
starting location for the
route. Press
Create
Move the cursor
WPT001, as this will be the
starting waypoint for the
route. Press ENTER . Move
the cursor towards waypoint
When the cursor is over
WPT002, press ENTER
This defines WPT002 as
the destination for the
leg being created. The
dashed line becomes
solid, and as the cursor
is moved away from
WPT002, a new dashed
line is drawn.
Move the cursor to the new desired destination point. In this
example there is no predefined waypoint at the position we
want to use in the route. Press
.
the means to create a waypoint at this point automatically.
to
To do this, a Create Waypoint (identical to the window dis-
played earlier) appears. The
only difference is that the co-
ordinates cannot be changed
from this window.
Press .
Done
.
WPT002
WPT001
ENTER . The receiver provides
Create Waypoint
Name:
WPT003
32`50.94 N
135`14.57 W
Description: 01/25/96 18:47
Type:
65