Britax KIDFIX II XP User Instructions

PAGE I
1. PRODUCT OVERVIEW
03
04
05
06
01 02
08
07
ISOFIX fastening points (automobile) Belt guide (bright red)
01 05
ISOFIX insertion aids ISOFIT locking arms
02 06
Belt holder (dark red)
03 Release knob
07
XP-SICT (only KIDFIX II XP SICT)
04 Safety button
08
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating instruc-
tions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems (see type
list) and in vehicles with a 3-point belt.
Please find the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle.
The KIDFIX II XP / KIDFIX II XP SICT is approved for two different methods of installation:
Symbol Installation type Approval type
with the ISOFIT locking arms on the semi-
ISOFIX fastening points in the vehicle.
universal a)
Observe the vehicle type list.
with the vehicle's 3-point seatbelt universal
a)
This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version can
be obtained from us or from www.britax.com
You can use your child safety seat as follows:
In the direction of travel Yes
1)
Against the direction of travel No
with 2-point belt No
2)
with 3-point belt Yes
15-36 kg
with ISOFIX fastening points Yes
(between seat surface and
backrest)
3)
on front passenger seat Yes
on outer rear seat Yes
on centre rear seat (with
4)
Yes
3-point belt)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle
seat is also approved for use by adults. The seat may not be in the area of effect of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
12
13
11
14
10
15
09
ISOFIT adjustment button Storage compartment
09 13
SecureGuard
10 Backrest
14
XP-PAD Seat cushion
11 15
Adjusting handle of the headrest
12
5. CARE AND MAINTENANCE
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulfils
important functions to ensure the smooth operation of the system. Replacement
seat covers are available from your dealer.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions on
the washing label of the cover.
Section
• The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use
any caustic cleaning agents (such as solvents).
9A
DANGER!
The child seat must not be used without the seat cover.
9B
Removing the seat cover
1.
Moving the headrest of the vehicle seat into the top
position.
19
2. Unhook the cover hook 19 on the rear of the backrest.
3.
Remove the top part of the cover and fold it forwards to
the seat surface.
4. Unhook the cover hook 19 on the front of the backrest.
5. Pull the cover off of the seat surface.
19
Removing the headrest cover
6.
Unhook the cover loop 20 on the rear of the backrest.
20
7. Unhook the cover hook 19 on the front of the backrest.
8.
Pull off the cover of the headrest 22 .
22
The cover can now be washed. Please observe the
instructions on the washing label of the cover:
19
Re-fitting the cover
Proceed in reverse order to put on the cover.
2. INTRODUCTION
Thank you for choosing KIDFIX II XP / KIDFIX II XP SICT to keep your child
safe through a new stage of their life.
KIDFIX II XP / KIDFIX II XP
In order to protect your child correctly, the
SICT
must always be used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
Britax Childcare
Britax Römer T.: +49 (0) 731 9345-199/-299
Kindersicherheit GmbH F.: +49 (0) 731 9345-210
Blaubeurer Strasse 71 E.: service.de@britax.com
D-89077 Ulm www.britax.com
Germany
Britax Childcare F.: +44 (0) 1264 334146
Britax Exelsior Limited E.: service.uk@britax.com
1 Churchill Way West www.britax.com
Andover
Hampshire SP10 3UW
T.: +44 (0) 1264 333343
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
17
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The
diagonal seat belt 17 in dark red and the lap belt
in bright red. The colour of the belt guides
16
on the child safety seat follows the same colour
16
scheme.
6. DISASSEMBLY AND DISPOSAL
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
TIP! The XP-PAD can remained applied for easier use on the diagonal belt
of your vehicle, the diagonal belt must be retensioned before every journey;
see: Section10 step 12 [page II].
REMOVAL:
1. Operate the release key of your vehicle seat buckle
17 11
2. Open the XP-PAD on the Velcro fastener and
11
remove the diagonal belt 17 .
3. Open the dark red belt holder 03 by pressing
backwards the key on the belt holder
03
unthreading the diagonal belt 17 .
Only for installation type A (ISOFIT):
03
4. To release the ISOFIT fastening, release the green
safety button 08 and the red release button
07 08
on the one and the on the other side opposite on
another.
The child safety seat can now be removed.
DANGER! The child safety seat must always be
secured when it is in the vehicle, even if
no child is being transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the
corresponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
3. CERTIFCATION
BRITAX RÖMER Testing and certification
Vehicle child safety In accordance with ECE* R 44/04
seat
Group
KIDFIX II XP II+III
KIDFIX II XP SICT
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment (ECE R
44/04). The seal of approval E (in a circle) and the approval number are located
on the orange approval label (sticker on the child safety seat).
DANGER! This approval will be invalidated if you make any modifications to
the child safety seat. Only the manufacturer is permitted to make
modifications to the child safety seat.
KIDFIX II XP / KIDFIX II XP SICT
WARNING! Use the
securing your child in your vehicle. It is in no way suitable as a
seat or toy in the home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a 2-point
belt, then in the event of an accident this may cause serious
injuries to your child, possibly resulting in death.
15 kg - 36 kg
(~4 Y - 12 Y)
KIDFIX II XP
KIDFIX II XP SICT
User instructions
and
07 first
www.britax.com
Body weight
15 to 36 kg
exclusively for
GB