Valore SUMMIT VSU-E30CS Use, Care And Installation Manual page 14

Table of Contents

Advertisement

Ductless recirculation is intended for applications where an exhaust duct work is not possible to be installed.
When converted, the hood functions as a recirculating hood rather than an exhaust hood. Fumes and exhaust
circulated back within the home.
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new duct
is not possible should you recourse to converting the hood into a recirculating hood.
Filter set. Order according to its Part number below. The standard Metal Filters are intended to capture
circulation.
RECIRCULATING KIT (REQUIRED IF NO DUCTING IS USED)
Hood Model
VSU-ExxCS models
VPL models
1. Purchase recirculating kit per the part number above
ducting from top of hood and secure to air diverter plate.
approximately every 3 to 4 months based on the average of 1 - 2 hrs. of
Charcoal Filter Replacements
Hood Model
VSU-ExxCS and VPL
to be changed more often depending on cooking habits.
Charcoal Filter Dimensions:
9in x 6-3/8in
228mm x 162mm
Part No.
Filters & Brackets in Pkg.
VRC-01SU
VRC-00PL
Part No.
Qty to Order
V0F-C002
2
12
2
2
E
Install charcoal filter (plastic side exposed)
into charcoal filter bracket.
cut-out side D of charcoal filter into bracket
first.
Lock charcoal filter into place by
pushing down on side E with locking tabs.
FIG. B
front of the hood
D
back of the hood
Insert tab
FIG. C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Summit vsu-e36csPlateau vpl-e36asPlateau vpl-e30as

Table of Contents