Nav 6000 Swivel Mounting Bracket (Optional) - Magellan NAV6000 User Manual

Nav 6000 Swivel Mounting Bracket (Optional)

Before installing the NAV 6000 in its swivel mount, there are
several things you should keep in mind.
The NAV 6000 should be mounted in a location where it is
easily viewed, where the operating keys are accessible.
Although the NAV 6000 is splash proof, it should not be
subjected to prolonged exposure to water. To protect the unit
from direct sunlight and water, the case (supplied with the
unit) should be used when the unit is not being operated.
We do not recommend installing the NAV 6000 within 1
foot (0.3 meters) of a magnetic compass or a flux gate sensor.
(Autopilots and remote electronic compasses typically have
flux gate sensors).
When deciding on a location for the swivel mount, find a
surface that is fairly flat for the base plate, making sure that
the unit can be viewed clearly. You will need four screws (not
included) for mounting the base plate on the selected surface.
Once mounted, the unit can be turned and tilted in its base
by loosening the knobs, and you can pass the power/data and
antenna cables around the mount bracket and connect them
to the unit.
Magellan NAV 6000
Secure the round swivel base to the dash board or other sur-
face using four screws.
67