Getting Started - DOD Is200W User Manual

GETTING STARTED

1. Insert a memory card (sold separately)
Please insert a micro SDHC card with class 6 or above, into the slot located on
the side of the unit.
Be sure to format the SD card before the initial use. Press [
System Settings, [
* This Camera supports to 32GB Micro SD Card. Please contact with your local deal for
purchase information.
* Do not remove the memory card during recording and firmware update.
2. Turning the power on / off
Press [ ] button to turn the unit on.
To turn the unit off, press the [
* After the unit has been installed in your car, connect the car power adapter and start the engine;
the unit will automatically turn on.
] to Format, and press [
] button again.
7
] twice to enter
] to start format.
Micro SD