Holding The Receiver; First Time Use - Initializing The Receiver; Turn The Receiver On - Magellan GPS Tracker User Manual

Holding the Receiver

GPS Tracker is designed to fit comfort-
ably in your hand. Hold the receiver in
the palm of your hand with the antenna
pointing towards the sky.

First Time Use - Initializing the Receiver

You do not need to initialize your receiver each time you use it
unless the receiver's memory has been cleared or if it has been
transported more than 300 miles while turned off.

Turn the Receiver On

To turn your GPS Tracker on, press PWR.
Because this is the first time you have used
your receiver, a screen will be displayed
prompting you to initialize your receiver. Press
ENTER to begin the initialization process.
If you do not see this screen once the receiver is turned on, then it was
initialized previously. To follow along, press MENU, highlight SETUP
and press ENTER. Highlight INITIALIZE and press ENTER and then
you will be taken through the steps to reinitialize the receiver.
8
ATTENTION
UNIT IS NOT
INITIALIZED
PRESS
ENTER TO
INITIALIZE
Magellan GPS Tracker