Advertisement

Included in your parts box:

Toolkit (4+5mm combo hex wrench,
13+15mm combo open-end wrench)
Touch-up paint
Reflectors (if not already installed)

Required Tools (not included):

Scissors or wire cutters
10mm open-end wrench (may be
needed)
Scooter won't turn on (no lights
• 5-minute auto shutoff feature has activated; turn scooter off then
on throttle)
on again
• Battery not charged
• Battery may not be connected from factory. Remove your
scooter's deck plate using the thumb screw under the on/off
switch, connect the battery, then replace the plate
• The scooter's fuse may be blown. See your owner's manual for
more information on locating and replacing this fuse, or call our
Customer Service line for help

Brakes rub when riding

• Some brake noise is normal and will not detract from your
scooter's performance
• If the brake rubbing is severe, you can re-adjust the brakes,
referring to owner's manual and to the small manufacturer's
booklet attached to the brake itself.
Can someone help me with...?
Call the Currie Technologies technical and customer service
department at 1-800-377-4532
Currie Technologies Technical and
1.800.377.4532
Customer Service

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the e-400 and is the answer not in the manual?

Questions and answers

Evelyn L Jennings
March 15, 2025

How much does the e 4zip 400 cost and how much is a battery and charger

User image 67d58231920f6
1 comments:
Mr. Anderson
March 15, 2025

The Currie eZip E-400 12V 35Ah Electric Bicycle Replacement Battery costs $92.89.

A replacement battery for the eZip E-400 with 12V 10Ah capacity was listed for $22.99, but the listing has ended.

A battery charger compatible with eZip E-400 and other models is available for purchase, but its price is not mentioned in the provided context.

This answer is automatically generated

Summary of Contents for eZip e-400

  • Page 1 Included in your parts box: • Toolkit (4+5mm combo hex wrench, 13+15mm combo open-end wrench) • Touch-up paint • Reflectors (if not already installed) Required Tools (not included): • Scissors or wire cutters • 10mm open-end wrench (may be needed) Scooter won’t turn on (no lights •...
  • Page 2 Seat Head Mast Tube Binder Bolt Currie Technologies Technical and Please recycle 1.800.377.4532 Customer Service packaging materials!

Table of Contents