eZip e400 Assembly Manual

All manuals and user guides at all-guides.com

Included in your parts box:

•
Toolkit (4+5mm combo hex wrench,
13+15mm combo open-end wrench)
•
Touch-up paint
•
Reflectors (if not already installed)

Required Tools (not included):

•
Scissors or wire cutters
•
10mm open-end wrench (may be
needed)
Scooter won't turn on (no lights
on throttle)

Brakes rub when riding

Can someone help me with...?
• 5-minute auto shutoff feature has activated; turn scooter off then
on again
• Battery not charged
• Battery may not be connected from factory. Remove your
scooter's deck plate using the thumb screw under the on/off
switch, connect the battery, then replace the plate
• The scooter's fuse may be blown. See your owner's manual for
more information on locating and replacing this fuse, or call our
Customer Service line for help
• Some brake noise is normal and will not detract from your
scooter's performance
• If the brake rubbing is severe, you can re-adjust the brakes,
referring to owner's manual and to the small manufacturer's
booklet attached to the brake itself.
Call the Currie Technologies technical and customer service
department at 1-800-377-4532
Currie Technologies Technical and
1.800.377.4532
Customer Service