Table of Contents
Advertisement
The calfpad swings away during transfers and is 3 height posi-
tions adjustable by sliding.
- Footrests (photo 6) : the footplate can be lifted during
transfers, footrests are height adjustable.
Loosen the bolt (A) to adjust to the desired height, firmly
tighten the bolt after adjustment.
Straps for standard legrest : to ensure a good position of the
feet.
Calf strap attached to the footrest support are both
adjustable by Velcro fasteners.
Note : the standard footrest supports and legrests are moun-
ted in pairs on the wheelchair; whenever you remove them,
remember that you have a right side and a left side !
!
Never lift the wheelchair by the footrest supports or
legrests !
Keep your fingers away from movable parts during folding,
disassembling or adjustment to prevent injuries !
A
6
2.1.6 Armrests
To remove armrest (photo 7), push down the push pin (A)
simply pullthem up, reverse the procedure to reinsert making
sure that the push pin (B) is properly engaged in its housing.
Reverse the procedure to reinstall.
Note : the armrests are mounted in pairs on the wheelchair ;
whenever you remove them, remember that you have a right
and a left side !
!
Keep your fingers away from movable parts during folding,
disassembling or adjustment to prevent injuries !
2.2 Frame
2.2.1 Side frame
The side frames are designed to accommodate fixation of
the front and rear wheels. No adjustment is required on side
frames.
A
B
7
Never lift the wheelchair by the armrests !
B
8
A
A
8A
19
Advertisement
Table of Contents
