Table of Contents
Advertisement
Correct and incorrect placements of safety belt (picture 22).
B
4.3 Restraint systems (picture 23)
* Non contractual picture, only for information !
Please refer to best practice recommended instructions
from the safety belt manufacturer.
A. Front restraints with straps
D
22
1. Connect the front straps around the frontal part of the
frame.
2. Release brakes and tension front straps by pulling the
wheelchair backwards from the rear.
3. Re-apply wheelchair brakes.
B. Rear restraints
1.Attach the snap hooks on the rear straps to the frame just
above the rear wheel attachments.
13
2.Tighten the straps.
23
C. Lap belt
1.The lap belt is mounted on the back frame
(picture 24).
2. Check that the lap belt on the wheelchair is correctly
C
A
fastened.
If lap belt on the wheelchair is missing we recommend that
the user should transfer to the seat of the vehicle, if possible.
D. Fastening of car safety belt
The car safety belt should not be kept from the user's body
by the parts of the wheel chair.
24
Advertisement
Table of Contents
