Part Names - Elmo CRV-24 Instruction Manual

Part Names

■Clicker
Front
Back
000000
000000
Power button
Turns ON / OFF the clicker.
Press this button for 3 seconds or longer to turn
OFF the clicker. See〈Starting SRS〉.
Power LED
Indicates the battery charge status.
The LED lights up when the clicker is turned on
and begins flashing when the battery level is low.
See〈About LED〉.
Response button（1～6,T/F）
Students can respond to questions using 1(A)
～6(F) and T(Y)/F(N) buttons.
The last pressed button lights up or
flashes for 5seconds. See〈About LED〉.
Strap hole
For attachment of a commercially available strap.
Student number ( Clicker number )
By default, a sticker with a number from 1-24
( or 32/40) is attached.
The supplied clicker number
sticker can be attached.
Caution
Device ID
ID number of the clicker.
Battery box cover fixing screw
Use the supplied screw driver to tighten the
fixing screw.
Battery box cover
Use the fixing screw to open/close the cover.
Be careful not to lose it.
Only open when absolutely
Caution
necessary.
Battery box
Insert the alkaline dry cell AAA batteries. See
〈Replacing the batteries of the clicker〉.
Wireless setting button
Use this button when configuring the wireless
connection setting with the wireless adapter.
Open the battery box cover when performing
the configuration.
See 〈Wireless setting for the clicker〉.
15