Related Manuals for Elmo HS-G1
Summary of Contents for Elmo HS-G1
- Page 1 ELMO Huddle Space HS-G1/HS-G2/HS-G3 取扱説明書 Please read this instruction manual carefully before using this product.
-
Page 2: Important Safeguards
■ IMPORTANT SAFEGUARDS ■ Read Instructions All the safety and operating instructions should be read before the appliance is operated. ■ Retain Instructions The safety and operating instructions should be retained for future reference. ■ Heed Warnings All warnings on the product and in the operating instructions should be adhered to. ■... - Page 3 ■ Grounding or Polarization This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet.
- Page 4 • If the product has been dropped or damaged in any way • When the product exhibits a distinct change in performance - this indicates a need for service. ■ Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.
- Page 5 This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product.
-
Page 6: Before You Use
BEFORE YOU USE Power Supply ■ Be sure to use the power cable and AC adapter that come with the product. ■ The power cable and AC adapter that come with the product are for the product only. Do not use them with another product. ■... - Page 7 ■ ELMO shall not be liable for any loss of data or program occurred during the use of the product. ■ This product is designed to be used with the normal HDMI devices. It is not designed to be used for the applications which require high-level reliability and security.
-
Page 8: Table Of Contents
■ TABLE OF CONTENTS ■ IMPORTANT SAFEGUARDS ·························································································································· 2 BEFORE YOU USE ···················································································································································· 6 ■ TABLE OF CONTENTS ····································································································································· 8 ➊ PACKAGE CONTENTS ····································································································································· 9 ➋ FEATURE COMPARISON BY MODEL ······································································································· 10 ■INTERFACE AND FUNCTIONS ··········································································· 10 ■LED ············································································································· 11 ➌... -
Page 9: ➊ Package Contents
➊ PACKAGE CONTENTS The items below are included with the product. If any item is missing, contact the dealer from whom you purchased this product. The items included vary depending on the model. Note in advance that some items may not be included depending on the model. -
Page 10: ➋ Feature Comparison By Model
➋ FEATURE COMPARISON BY MODEL Ports (input/output) and features vary depending on the models (HS-G1/ HS-G2/ HS-G3). Refer to the below table for details. ■INTERFACE AND FUNCTIONS INTERFACE HS-G1 HS-G2 HS-G3 ○ ○ MIC IN ○ ○ ○ HDMI IN（8 terminals）... -
Page 11: Led
FUNCTION HS-G1 HS-G2 HS-G3 Playback Use a media player on your computer to play the recorded files. Operation with the remote ○ ○ control ○ ○ Mass storage mode ○ ○ ○ Clock function Use with the Battery for ○... -
Page 12: ➌ The Name Of Each Part
➌ THE NAME OF EACH PART A．OPERATING PANEL C. REAR PANEL B. INPUT TERMINALS ⑤ ④ ① ② B. INPUT TERMINALS B. INPUT TERMINALS ④ ③ Remote control sensor Name Function To turn ON/OFF the power. ① Power ON ：LED lights up blue Power button Power OFF ：LED lights up red (Standby) MIC MUTE... - Page 13 B．INPUT TERMINALS ③ ④ ① ② Name Function To connect an external microphone (electret condenser microphone) to input audio from the external microphone. ① MIC IN port ※When the external microphone is connected, the built-in microphone is disabled. To insert the SD card (commercially available). ②...
- Page 14 HDMI device Blu-ray player / DVD player / Android device HDCP non-compliant HDCP compliant HDMI input connector (Channel 1,3,5,7) (Channel 2,4,6,8) Image Image Normal image Normal image Input image protected by protected by (Not protected) (Not protected) HDCP HDCP HDMI OUT ×...
- Page 15 ③ USB port Use a media player on your computer to play the recorded files. （※The USB cable is not included in the HS-G1.） To output audio. (The audio cable is not included in the product.) ※This function is available only when the analog RGB output is AUDIO OUT ④...
-
Page 16: ➍ Basic Operations
➍ BASIC OPERATIONS ■CONNECTING THE INPUT CABLE TO THE PRODUCT After connecting the HDMI cable to the device, connect it to the HDMI input port of the product. Repeat the same when multiple devices are connected. ■CONNECTING THE OUTPUT CABLE TO THE PRODUCT Connect the output port in the rear panel of the product and the input port of the output device (such as a monitor or projector) with an appropriate cable. -
Page 17: ➎ Switching The Displayed Image
➎ SWITCHING THE DISPLAYED IMAGE ■SWITCHING THE INPUT SOURCE The HDMI device to input can be selected by the following methods: ※Make sure that the Output mode selection switch is set correctly. ＜Switching with the Channel buttons on the Operating panel＞ Select the desired port by pressing the Channel button（①～⑧）on the Operating panel. - Page 18 【CAUTION】 ●About Recording There are cases where recording is not possible. In that case, LED of the REC button flashes. For details, refer to “➏ RECORDING FEATURS”. RECEIVING SIGNAL FROM THE REMOTE CONTROL Point the transmitter of the remote control at the receiver of the product. Then press the desired button.
-
Page 19: ➏ Recording Feature
USB cable in the Mass Storage mode to playback the recorded still images or videos. ※The Mass Storage feature is not available with the HS-G1. Recording limitations The recording is not possible in the following cases: ①The product is connected to a computer with the USB cable. -
Page 20: Recording Procedures
■RECORDING PROCEDURES This section explains how to record still images and videos of the device connected to the product via the HDMI cable as well as the audio from the built-in microphone or external microphone to the SD card. Video （MP4 file / Image size：1080p/30fps） ①Select the desired channel from 8 HDMI input channels. -
Page 21: ➐ Other Features
➐ OTHER FEATURES ■REAL TIME CLOCK FUNCTION By setting the time, you can add time information to the data (video / still image) when recording to the SD card. HOW TO SET THE TIME ①Set up the product and connect an image output device with a commercially available RGB cable. -
Page 22: Connecting A Commercially Available Hdbaset Device
AC adapter. For details about the installation and operation procedures, refer to the instruction manual included in the battery for the Huddle Space. ※Also check the following Elmo official website for further details. http://www.elmousa.com/ http://www.elmoeurope.com/... -
Page 23: ➑ Trouble Shooting
➑ TROUBLE SHOOTING ■SYMPTOMS AND SOLUTIONS Check the following items. If any abnormality is found, consult the dealer from whom you purchased this product or our nearest branch/office. Symptom Possible cause/ remedy ・The cable is not correctly connected. (Input cable, output cable) No image is displayed. - Page 24 ・The volume level of the connected device is too low. Increase There is no sound. the volume level. ・An audio cable is connected to the MIC IN port in the front of the product. Reconnect the audio cable to the AUDIO OUT port in the rear panel.
-
Page 25: ➒ Specifications
Power supply ※No power supply from the USB bus. Remote control (IR) pulse-position modulation method Slide switch (Output Selectable between HDMI, RGB and HDBaseT. ※For HS-G1 and HS-G2, selectable between HDMI and RGB. mode selection switch) Video recording H.264/mp4 format... -
Page 26: Resolution / Framerate
■RESOLUTION / FRAMERATE HDMI input supports the following resolutions: Resolution 1080p/1080i/720p/480p/XGA (Max. 1080p/60fps) NOTE The output resolution and frame rate depend on the connected device. -
Page 27: Trademarks And Licenses
■TRADEMARKS AND LICENSES 、Image Mate are the registered trademarks of ELMO Co., Ltd. HDMI、 High-Definition Multimedia interface are trademarks or logo and registered trademarks of HDMI Licensing LLC. SD、SDHC、SDXC、 logo are trademarks of SD-3C,LLC. HDBaseT and are trademarks of HDBaseT Alliance. - Page 28 株式会社エルモ社 OVERSEAS SUBSIDIARY COMPANIES 〒467-8567 名古屋市瑞穂区明前町 6 番 14 号 ELMO USA CORP. Web：http://www.elmo.co.jp □Headquarters 1478 Old Country Road 製品のお問い合わせは、下記営業部へ Plainview, NY 11803, U.S.A. 株式会社エルモ社 Tel. (516) 501-1400 エルモソリューションカンパニー Fax.(516) 501-0429 Web：http://www.elmosolution.co.jp E-mail： elmo@elmousa.com Web：http://www.elmousa.com □ 北海道営業部 〒001-0021 札幌市北区北 21 条西 8 丁目 3 番 8 号 バックスビル...
Need help?
Do you have a question about the HS-G1 and is the answer not in the manual?
Questions and answers