How To Use The Noise Cancellation Function; How To Pair Woofit Headphone With Bluetooth Devices; First Time Pairing - SACKit WOOFit User Manual

How to use the Noise Cancellation function

When you slide the NC button to the On side (On side=the RED
mark will be hidden and the light indicator will turn green), then
you can enjoy the headphone in Noise cancellation mode. When
you don't need the Noise cancellation function, please slide the NC
button to the OFF side.

How to pair WOOFit Headphone with Bluetooth devices

First time pairing:

• Long press the MFB button for 10 seconds until LED light is
flashing red and blue (flashing red and blue LED light indicates
successful entering pairing mode). After the first 5 seconds, you
will hear the ON sound. Keep pressing the button for another 5
seconds to turn on pairing mode
• Please keep the headphone and Bluetooth device in range of 1
meter when pairing and make sure your headphone is off
• Go into the Bluetooth settings on your device and search for
new Bluetooth devices and select WOOFit Headphones
• Long press MFB button to turn off your WOOFit Headphone
5