Control Elements; Link; Attack; Sustain - SPL Transient Designer 2880 Manual

Control Elements

On
With the ON button you can turn the Transient Designer on or off.
The ON button is illuminated when the plug-in is activated. You can
also click on the Power-LED to activate or bypass the plug-in.

Link

The LINK mode can not be activated when a mono track is pro-
cessed. Thus the LINK mode can only be activated when a stereo
track is processed. In that case the louder of the two stereo tracks
determines the control signals (according to ATTACK and SUSTAIN
settings). If the LINK mode is not activated for a stereo track, left
and right channel are processed independently according to their
individual levels.

Attack

With the ATTACK control you can amplify or attenuate
the attack of a signal by up to 15 dB. Positive ATTACK
values emphasize attack events, negative ATTACK
values smooth out the attack envelopes of sound
events. For an extensive description and explanation of the pos-
sible applications of the ATTACK control please refer to "Applica-
tions" on page 9 cont.

Sustain

With the SUSTAIN control you can amplify or attenuate
the sustain of a signal by up to 24 dB. Positive SUSTAIN
values lengthen the sustain, negative SUSTAIN values
shorten the sustain. For an extensive description and
explanation of the possible applications of the SUSTAIN control
please refer to "Applications", page 9 cont.
®
Transient Designer Analog Code Plug-in
7