Hob Use (Continued)
Switching the appliance off
EN
To completely switch off the appliance, use the "On / Off
Touch the "On / Off
After switching off a single cooking zone or the entire cooking surface, the presence of
residual heat will be indicated in the digital displays of the corresponding cooking zones
in the form of an
If the heat setting is at and
touched one additional time, and the heat setting will go to zero .
For faster adjustment, keep your finger on the
value is obtained .
If more than one sensor is pressed for longer than 10 seconds,
heat setting display . To reset, touch the "On / Off
Switching a cooking zone off
To switch off a cooking zone, return the setting to
and touch sensors
CTR364T010_SLI-00082A-02_EN.indd 16
" sensor .
(for "hot") .
you want to turn the
or
.
" control sensor .
burner off, the sensor can be
or
sensor until the required
" sensor .
by using the control panel's heat setting
16
will show in the
26/12/2011 15:22:00