Features - Bounty Hunter Lone Star Owner's Manual

LONE ST R DEMONSTR TION
Here is a quick way to demonstrate the basic features of the Lone Star.
I. Supplies Needed
• A quarter (25¢) • A penny (1¢ - Post 1982)
• A nickel (5¢)
II. Position your Lone Star
• Place the detector on a table, with the search coil hanging over the edge.
• Be sure that the search coil is far away from walls or metal objects.
Keep the search coil away from any metal in the table.
• Turn off appliances or lights which cause electromagnetic interference
III. Beginning Switch Settings
• Right Knob (DISC/NOTCH) —
100% counterclockwise to low
• Left Knob (SENSITIVITY) —
click on and set to 3:00 (3/4 turn)
• Do not press any touchpads
IV. ll Metal Detection
A. Wave all objects under the search coil
• NOTICE THE SINGLE TONE
V. Discriminate Mode
A. Press the DISC touchpad
B. Turn the right knob (DISC/NOTCH) to the 12:00 position.
C. Wave all objects under the search coil.
• NOTICE THE DIFFERENT TONES
• NOTICE THE METALS ELIMINATED
D. Move the DISC/NOTCH control to different positions and eliminate the
penny from detection.
VI. uto Notch Mode
A. Press the AUTO NOTCH touchpad
B. Right knob (DISC/NOTCH) 100% counterclockwise to low
C. Wave all objects under the search coil while
slowly turning the right knob clockwise.
• NOTICE THE DIFFERENT TONES
• NOTICE THE METALS ELIMINATED
• Small piece of aluminum foil
• A dime (10¢)
• A nail
5