Description; Features - Omnitronic PM-3010 User Manual

Occupation balanced XLR-connection:
Occupation jack plug:

DESCRIPTION

Features

Professional 3+1-channel dj mixer
• Mixer for 3 Mics, 3 Phono/Aux and 7 Line sources
• Matrix input assignment; Aux and MIC input sources are freely assignable to each channel
• Separately controllable Session input to connect another dj mixer
• 1 separate DJ-Mic channel on the front panel, 3-fold tone-control (bass, middle, treble) and On Air-button
• Talkover-function
• Mic-inputs via 1/4" mono-jack on the rear panel
• High-quality and super-smooth Dual Rail channel-faders
• Crossfader can be freely assigned to channels 1-3 (X-Fader Assign-switch)
• Crossfader Curve-function for extremely fast cut-times and scratch-time
• Crossfader Flip-function for inverting the channels
• Sensivity-control (Gain), 3-fold tone-control (bass, middle, treble) and 10-fold display for every channel
• 2 LED-level-displays (master-out L/R)
• Headphones-connection on the front panel via 6.3 mm mono-jack on the front panel
• Headphones-output adjustable via Cue Level-control
• Cue Split/Cue Mix-function
• Mixing of the headphones-signal possible via cue mixing-fader
• Separately controllable monitor-output (DJ-Booth)
• Master-Out via balanced XLR-connectors or jack plug, -10dBV and +4dBV switchable
• Master output, Booth, Rec-Out via RCA-sockets
• High-grade discotheque-mixer
Balanced use with XLR connectors
1
2
1 = Ground / Shield
2 = Hot (+)
3 = Cold (-)
3
Input
For unbalanced use pin 1 and pin 3 have to be bridged
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
18/26
2
1
3
Output
Balanced use of
stereo 1/4" jack plugs
Tip =
hot (+)
Ring =
cold (-)
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
10006850_V_1_0