Useful Information; Character Entry - Panasonic X-TG9385BX Operating Instructions Manual

TG9385BX(e).book Page 45 Monday, November 2, 2009 1:26 PM

Character entry

Y Handset / [ Base unit
The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned
to it. The characters that can be entered depend on the character entry mode (page 45).
– Handset: Press {<} or {>} to move the cursor left or right.
Base unit: Press {7} or {8} to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press {CLEAR} to erase the character or number highlighted by the cursor. Press and hold {CLEAR}
to erase all characters or numbers.
– Press {*} to switch between uppercase and lowercase.
– When entering another character located on the same dial key, operation will differ depending on the
display language you select.
English
L Press {>} on the handset or {8} on the base unit to move the cursor to the next space, then press
the appropriate dial key.
Arabic/Persian
L Press {<} on the handset or {7} on the base unit to move the cursor to the next space, then press
the appropriate dial key.
Character entry modes
The available character entry modes are as follows:
Alphabet (ABC), Numeric (0-9), Arabic (
When in these entry modes except Numeric, you can select which character is entered by pressing a dial
key repeatedly.
When the unit displays the character entry screen:
{1/A/?} (right soft key) i {V}/{^}: Select a character entry mode. i {OK}
Note:
L When you select Arabic or Persian as the display language, numbers in the character table are
displayed in Arabic or Persian.
Alphabet character table (ABC)
Numeric entry table (0-9)
), Persian ( ), Extended 1 (G)

Useful Information

45