Dryer Fails To Operate; Control Lamp Lights Up But Dryer Fails To Operate - Miele T300 Technical Information

Technical Information
Remedy
Prior to the above models a retaining clip, Part no. 1928830, should be
fitted with the screw supplied and in accordance with the instructions
provided to the rear left side of the container runner.
Fitting procedure:
1. Remove the machine lid.
2. Remove the container runner fitting screw.
3. Fit the clip.
6.8

Dryer Fails to Operate

6.8.1

Control Lamp Lights Up But Dryer Fails to Operate

Possible Cause
Relay (door safety relay) damaged or charred.
Fault Rectified
From Machine no. 9587769 – Condenser dryer.
From Machine no. 9597965 – Vented dryer.
T 369 C from Machine no. 8399820 until 9542308.
Relays without plug housing used.
Remedy
On appliances prior to the above listed Machine nos. the plug housing
and connector cover should be removed. The protective sleeve, Part no.
1227280 must be fitted onto the 2.5mm
to the middle contact on the relay.
T300 Series Clothes Dryer (Condenser)
2
black wire before it is connected
62