Drum Drive Belt; Replacement - Miele T300 Technical Information

Technical Information
5.12

Drum Drive Belt

5.12.1

Replacement

Figure 5-21: Drum Drive Belt Replacement 1
1. Open the front panel – Refer to Section 5.2.1.
2. Units without a Machine no. prefix, remove the fan unit – Refer to
Section 5.6.1.
3. Units without a Machine no. prefix, release the spring (refer to Section
5.10.1 – Drum Drive Motor Removal, Step 3).
4. Units with a Machine No. prefix, 10/.. or 11/.. remove belt from pulley
as in Figure 5-12 – Removing the Drive Belt.
5. Unscrew the collector drawer frame (refer to Figure 5-21 – Drum Drive
Belt Replacement 1, Item 2, and lay it with its hose connection in the
condenser box.
6. Cut through the damaged belt and remove it.
7. Remove the screws (refer to Figure 5-22 – Drum Drive Belt
Replacement 2, Item 1) and ease open the bearing ring panel.
8. Slide the new belt through the gap between the bearing ring panel
and the appliance casing (refer to Figure 5-22, Item 2). Refit the
bearing ring panel and screw it tightly into place.
9. Where fitted, disconnect the electrical connection plugs (refer to
Figure 5-22, Item 3).
10. Unscrew the slip ring brush holder (refer to Figure 5-23 Drum Drive
Belt Replacement 3, Item 1).
T300 Series Clothes Dryer (Condenser)
40