Adjusting The Mower Cutting Height; Parking Brake; Cruise Control; Stopping The Tractor And Engine - Snapper NXT 19542 Operator's Manual

Adjusting the Mower Cutting Height

Use the height-of-cut switch to raise or lower the mower
cutting height (see Features and Controls).
Press the switch UP to raise the mowing cutting height and
DOWN to lower the mower cutting height.

Parking Brake

Use the parking brake control to engage or disengage the
parking brake when the tractor is stopped (Features and
Controls).
Engage the Parking Brake - To engage the parking brake,
fully depress the brake pedal, pull UP on the parking brake
control, and release the brake pedal.
Disengage the Parking Brake - To disengage the parking
brake, fully depress the brake pedal, press DOWN on the
parking brake control, and release the brake pedal.

Cruise Control

TO ENGAGE:
1. Depress the forward ground speed pedal (see Features
and Controls).
2. Pull up the cruise control when the desired speed is
reached. The cruise will lock in one of its five locking
positions.
TO DISENGAGE:
1. Depress the brake pedal.
OR
2. Depress the forward ground speed pedal.

Stopping the Tractor and Engine

• Do not choke the carburetor to stop the engine.
1. Release the ground speed pedals to return to the
NEUTRAL position (see Features and Controls).
2. While still on the lawn, disengage the PTO switch, then
wait for all moving parts to stop.
3. Press the start/stop push button to STOP the engine.
4. Remove the starter insert and keep out of the reach of
children.
5. Engage the parking brake. Fully depress the brake
pedal, pull UP on the parking brake control, and release
the brake pedal.
NOTE: In the event of an emergency, the tractor/engine
will stop immediately by pressing the on/off push button or
pulling out the starter insert.
en
WARNING
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
19