Adjusting The Mower Cutting Height; Parking Brake; Cruise Control; Stopping The Tractor And Engine - Snapper 2690978 LT2146 Operator's Manual

Riding mower, 21 gross hp, 46" (116,8 cm)
Table of Contents

Advertisement

Available languages

Available languages

Adjusting the Mower Cutting Height
Use the height-of-cut switch to raise or lower the mower
cutting height (see Features
and Controls).
Press the switch UP to raise the mowing cutting height and
DOWN to lower the mower cutting height. The height-of-cut
is displayed on the electronic dashboard.
Parking
Brake
Use the parking brake control to engage or disengage the
parking brake when the tractor is stopped (Features
and
Controls).
Engage the Parking Brake - To engage the parking brake,
fully depress the brake pedal, pull UP on the parking brake
control, and release the brake pedal.
Disengage
the Parking
Brake - To disengage the parking
brake, fully depress the brake pedal, press DOWN on the
parking brake control, and release the brake pedal.
Cruise
Control
TO ENGAGE:
1. Depress the forward ground speed pedal (see Features
and Controls).
2. Pull up the cruise control when the desired speed is
reached. The cruise will lock in one of its five locking
positions.
TO DISENGAGE:
1. Depress the brake pedal.
OR
2. Depress the forward ground speed pedal.
Stopping
the Tractor
and Engine
WARNING
Fuel and its vapors are extremely flammable and
explosive.
_j_
Fire or explosion can cause severe burns or
death.
• Do not choke the carburetor to stop the engine.
1. Release the ground speed pedals to return to the
NEUTRAL position (see Features
and Controls).
2. While still on the lawn, disengage the PTO switch, then
wait for all moving parts to stop.
3. Move the throttle/choke control to the SLOW position.
4. Turn the ignition switch to the STOP position.
5. Remove the key and keep in a safe place out of the
reach of children.
6. Engage the parking brake. Fully depress the brake
pedal, pull UP on the parking brake control, and release
the brake pedal.
NOTE: In the event of an emergency, the engine can be
stopped by turning the ignition switch to STOP. For normal
engine shut down, see Stopping
the Tractor and Engine.
(_
19

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

2690978

Table of Contents